If you are in Delhi, be Prepared for Higher Electricity Bills from This Month

Arpit | 21st September 2017

If you are in Delhi, be Prepared for Higher Electricity Bills from This Month

The Delhi Electricity Regulatory Commission has decided to add a new surcharge on the electricity bill starting September 1, due to which the electricity bills in the National Capital will be higher. The freshly ordered tariffs will retain the same tariff per kWh, but because of the revised fixed charges, the effective tariff consumers will pay in Delhi will be higher. A new surcharge of 3.7% has been added to all power bills alongside the existing 8% charge that was already there. Further, a fixed charge has been levied on the basis of your sanctioned load, which is the maximum load that your household loads can derive out from the DISCOM.

For those of you on a 1kW connection, the fixed charges have actually been reduced from Rs 40 a month to Rs 20 a month. For a 2 kW sanctioned load, for up to 400 units consumed, the fixed charges have been unchanged and will remain at Rs 40. However, most of the connection in Delhi are 3kW and beyond, and this is where the new fixed charges have been levied. For 3 kW sanctioned load users, the fixed charges have been increased to Rs 105 from Rs 100, which could see your electricity bill jump up by about 3.4%. For those residential properties where sanctioned load is 4kW, the fixed charges have been increased by Rs 40, and with the new surcharge, the bill will go up by 4.5%. The worst affected are those with 5 kW sanctioned load where the fixed charges have been set at Rs 175 instead of Rs 100 and with a further surcharge, you will most likely see your bill increase by about 4.6%.

Overall, for most of the residents, you can expect about 4% increase in your electricity bill from this billing cycle onwards. In the times where everything is becoming more expensive, this increase in power costs should come as little surprise. However, if only you had opted for a rooftop solar plant and were producing your own power, this would be no news for you and you would have been unaffected. Still, it is not too late to act for you to connect with one of the best solar companies in Delhi/ NCR. If you want to ensure that you are isolated from these price rises in the cost of power, go ahead and schedule your site survey on MYSUN and get home your own solar system.

Why is a Proper Site Survey so Crucial for Rooftop Solar

Arpit | 20th September 2017

Why is a Proper Site Survey so Crucial for Rooftop Solar

If you are contemplating going solar and have or are planning to choose MYSUN as your solarization partner, you must have noticed, that the Site Survey is the first step. In fact, we begin your solar journey by performing a site survey.

In the last one year of being in operations and speaking to literally thousands of customers, one question we have been repeatedly asked -why is site survey so important? Some customers ask, “There are a  plenty of solar companies in the market that are fine to share a solar system quote just by looking at the electricity bill and some images of the rooftop. So why this effort of a dedicated engineering team visiting our rooftop, spending at least a couple of hours, using highly advanced and sophisticated tools before preparing a detailed quote?” Since the answer to this question has several aspects, and we feel site survey is the most crucial part of you going solar, we wrote a blog on the same. Follow along:

Why is site survey so important?

Each Rooftop is Unique:

Unlike a lot of countries especially in Europe where houses are built similarly, in India, each household, each building, each rooftop is unique. It has unique designs, unique installations and therefore needs to be studied like a unique individual case. The only way to accurately know what your rooftop looks like, the neighbourhood there, the kind of objects around the area that will influence the generation is possible via a proper site survey. Your rooftop type, be it the inclination, direction or even construction material plays a very critical role when we design your solar system and the structure that would host the solar panels. Therefore our solar engineers, not just size your rooftop for details like available area and directions, they also do a thorough study of the details mentioned above to ensure the generation from your solar system is the best possible.

Shadow Analysis is Crucial:

Unless you live in complete isolation, which is highly unlikely, there is always a possibility that there are some trees, high-rise building, or other such structures around your installation areas that will cast a shadow. Moreover, the shadow pattern will change from season to season. Due to this shadow, the total sunlight received by the solar systems will be affected. Therefore a good shadow analysis of your rooftop is invaluable as it tells you the correct generation potential and therefore makes key decisions like where should you place the panels and what kind of system size you should be using. A wrong shadow analysis will leave you with an expensive solar system for 25 years that will never perform to its optimum limit.

Your Electricity Bill & Sanctioned Load:

MYSUN Site survey engineers also do a thorough check and bring back crucial information like your sanctioned load, the number of phases of supply your site has and kind of consumption pattern you have. Analysis of this consumption pattern is so important when we design the system as it helps us map your usage correctly so that the benefit from solar is maximum. This would help you depend lot lesser on your DISCOM for power and save on your electricity bill. The information from the bill is also important from the point of view of Net Metering and System Design. Since MYSUN is a full-service company, we also help you obtain the Net Metering and commissioning of your Solar PV Plant. For the same, information of your electricity bill is important.

It helps us ensure your rooftop is usable:

We realize that even though an unused part of the house, your rooftop is crucial. At MYSUN, we handle your rooftop with utmost care. A site survey helps us analyze your rooftop and suggest a design that would make sure your rooftop can be accessible and usable. It also helps us to ensure that the aesthetics of your rooftop is maintained and how best can the installation be done accommodating if there are any existing structures there. A personal inspection during the site survey also helps us when planning the installation as to where would the various components like the inverters or batteries if applicable will be installed.

Any special requirements can be addressed:

What if you want to install a superstructure that would allow you to install the panels at a height allowing you to access your rooftop like normal? Or any other such requirement, we ensure that our engineers note them while conducting the site survey. This is taken care and given special consideration when the system is being designed. All your demands, instructions and requests are duly noted so that your experience of installing solar panels is as smooth as possible and everything is well documented.

Why Site Survey with MYSUN?

Clear from the above, there are several things that come as an output from a site survey. All these points are used and kept into consideration when designing your rooftop solar system. Since MYSUN Site Survey is done by a highly qualified team of site engineers with the latest solar equipment, the report that you eventually get with the system design, as well as the final quote, is highly personalized and highly accurate. The following therefore become a part of a comprehensive site survey report:

  • Shading analysis (nearby shading and far shading objects)
  • Layout of the site
  • Solar access & irradiation analysis
  • Module layout in 2D (even 3D layouts are shared in certain cases)li>
  • Expected generation - Monthly and Annual for Year 1
  • Monthly and Lifetime Savings with ROI
  • System capacity and proposal with and without net metering
  • Price of the solar system
  • Your contribution to the environment
  • One proposal for a MYSUN Assured Order with Tier 1 Equipment
  • Make of major items in the proposal (Module and Inverter)
  • O&M Proposal
  • AD Benefits/ EMI Option (If applicable)
  • 3D model (if you opt for it)

We treat every customer as an individual and special attention is given to every rooftop that we work on because we believe that a solar system is a highly personalized installation and there is no one size that fits all. So, if you had a question about, why a site survey, we hope this would have helped answer the question.

Currently, the MYSUN Site Survey Services are available in Delhi/NCR. In the regions beyond, it is the responsibility of the MYSUN partners to perform the site survey. We are expanding rapidly in the regions beyond Delhi/NCR so that we are able to serve all our consumers who are showing a keen interest in going solar. So goa head, and schedule your site survey now.